BETEC™ grouts and cementitious mortars
Quality, performance, expertise.
BETECTM products are grouts and cementitious mortars for underfilling and connecting various structural elements within buildings and infrastructure. BETECTM products are renowned for their stable application, ease of installation, high flowability, long open times, fast early strength development and long-term durability. The overall high performance of these materials is supported by an experienced technical and field services team. BETECTM products perform all the time, every time under a wide range of conditions and applications.
BETEC™ Product Documents
| Product Name | Product Data Sheet |
| BETEC™ Flex S150 | |
| BETEC™ M-5 | |
| OMNITEK® CPC | |
| OMNITEK® Deco | |
| OMNITEK® Grout 5000 | |
| OMNITEK® Microconcrete 180 | |
| OMNITEK® Paint EC | |
| OMNITEK® Realk Liquid | |
| OMNITEK® RM Fiber |
Products
- Product Name
- Description
- Key Benefits
- Applications Type
Betec Flex S150 is a flexible, two-part, polymer-modified cementitious waterproofing system. The two components of Betec Flex S150 are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied
by trowel or brush, in two coats, to form a hard but flexible waterproof cementitious coating.
- Flexible - bridge hair line cracks
- Good adhesion to concrete, masonry, ceramics, and most common substrates and does not attack metal
- Non-toxic
- Non-chlorinated Swimming Pool (unless the membrane is protected by chlorine-resistant protection screed as well as chlorine-resistant tiles adhesive)
- Bathroom, balcony, wet area and planter box
- Non-chlorinated water-retaining structure
Betec® M-5 is a special blend of cement, quartz sand and active chemicals in powder form for the protection of concrete against water penetration.
- Long-term waterproofing
- Fully integrated with the concrete
- Reduces shrinkage and hairline cracks
- Floor, basement wall and slab
- Swimming pool, water feature
- Parking deck
OMNITEK® CPC is a single component cement based primer for corrosion protection of steel reinforcement bars according to EN 1504-7 and bonding for cement based repair systems.
- High passivation capacity, effectively stopping active corrosion.
- High adhesion to steel and perfectly compatible with cement based repair mortars and concrete.
- One component solution with fast, easy and cost effective application by brush.
- Compatible with all OMNITEK® and BETEC® cement based repair mortars and concrete.
- Corrosion protection of steel reinforcement bars.
OMNITEK® Deco is a high strength, cement based, volume stable mortar, suitable for levelling and finishing of concrete surfaces in layer thicknesses of 2-5mm.
- High early- and final strength properties and excellent adhesion to concrete for a maximum durability and long-term performance.
- Fast, easy and cost effective application by manual application or spraying.
OMNITEK® Grout 5000 is a cement based, volume stable, flowable anchoring grout, ideally for anchoring of reinforcement steel bars in concrete repair.
- High early- and final strength properties for structural repair of concrete.
- High flowable consistency with long open times for a fast, easy and cost effective application by pumping or pouring.
- Self-compacting and controlled volume expansion.
- Adjustable grout volume for void filling applications.
- Anchoring of reinforcement steel bars or rods in concrete.
- Filling voids, cavities and recesses in concrete structures.
OMNITEK® Microconcrete 180 is a cement based, volume stable flowable repair concrete with high strength and self-compacting properties, ideally for recasting concrete.
- High early- and final strength properties for structural repair of concrete.
- High flowable consistency with long open times for a fast, easy and cost effective application by pumping or pouring.
- Self compacting and controlled volume expansion.
- Recasting concrete on vertical surfaces.
- Recasting concrete on horizontal surfaces.
- Recasting concrete for repair of joints, edges and damaged precast elements and concrete structures.
- Recasting repairs in structures with a high density of reinforcement steel.
OMNITEK® Paint EC is an advanced water based acrylic paint, specifically designed for long term anti-carbonatation and surface protection according to EN 1504-2.
- High carbonatation resistant and weather resistant elastic coating for long term protection of concrete, masonry and cement rendered surfaces.
- One component solution with fast, easy and cost effective application by roller, brush or spraying.
- Environmentally friendly, water based and solvent free coating.
- Surface ingress protection of concrete.
- Long term weather resistance and anti-carbonatation for concrete, masonry and cement rendered surfaces.
OMNITEK® Realk Liquid is a single component re-alkalinisation liquid for protecting and upgrading concrete, removing the effects of carbonatation due to creation of an alkaline environment in the concrete.
- High re-alkalinisation capacity, effectively removing the effects of carbonatation.
- One component, ready to use solution with fast, easy and cost effective application by spraying.
- Compatible with all OMNITEK® and BETEC® cement based repair mortars and concrete.
- Solvent free.
OMNITEK® RM Fiber is a fiber reinforced, high strength, high-sulphate resistant cement based, volume stable repair and re-profiling mortar, suitable for concrete repair in demanding environments in the safest, most targeted and productive way in layer thicknesses of 10-50mm.
- High early- and final strength properties for structural repair of concrete.
- Polymer modified for an excellent adhesion, and fiber reinforced for a long-term durable repair without surface cracks.
- High carbonatation, chloride, freeze-thaw and chemical resistance for maximum durability in all exposure conditions.
- Stiff plastic consistency for fast, easy and cost effective application by manual application in horizontal and vertical applications.
- General concrete repairs in vertical and horizontal conditions, as well as re-profiling applications of joints, edges and damaged precast elements and concrete structures.
- Repair of concrete structures exposed to sea water, corrosive environments or severe freezing conditions.
Contractor-friendly application for critical infrastructure solutions
With an extremely broad portfolio at hand, BETECTM users will find a number of products and solutions that encompass every application they might encounter. These include grouts for all application heights, as well as a year-round grouting portfolio. BETECTM products have been adapted to allow contractors to continue working even at cold temperatures. For some of the more specialised BETECTM applications, this performance adaptation is critical.
BETECTM serves the most demanding applications
BETECTM solutions are commonly used for assembling and joining prefabricated structures, for underfilling structural elements such as bridge bearings and block-out connections on beams and columns, and for machine foundations. Machine foundations in particular are where the durability and versatility of BETECTM products begin to shine through.
As an example, BETECTM is commonly used in wind turbine foundations, which are often situated in areas where low temperatures, speed of application and remoteness are factors in construction. Similar conditions are often found in the turbine rooms of hydroelectric dams. Apart from renewable energy, mass rapid transit is also a strong BETECTM application field. There, BETECTM products can be used in rail beds, station boxes and in the foundations for transformation stations. For these applications, BETEC's durability is paramount, but the product also incorporates innovations that make life easier for contractors.
On time, on budget, easy to use
Massive infrastructure projects operate under extreme pressure to conform to the structures of time and budget. For these projects, BETECTM ensures that these goals are met. The major benefit that BETECTM delivers are extremely stable flow and application times. This frees producers from the necessity of adapting water ratios during application. In other words, once the machinery is set correctly, BETECTM will maintain its characteristics until production is complete. Unlike other brands, there is no variation in performance. These contractor-friendly innovations have led to worldwide BETECTM usage. BETECTM is CE marked for use throughout the European Union where applicable, and conforms to the national guidelines for both France and Germany.
Backed by outstanding support, anywhere you need it
We have built our reputation on more than simply, high-quality products and high performing solutions. Our products are trusted globally because of our commitment to providing technical solutions and field support. No matter where you are or what you're building, we can help find a product that will suit your needs.
