Liquid waterproofing
High performance, fast curing, liquid applied, seamless protection
GCP liquid waterproofing products offer high performance with unique characteristics. Liquid waterproofing is cold-applied and cures quickly allowing construction sites to quickly return to full operation.
Liquid waterproofing Product Documents
| Product Name | Product Data Sheet |
| ADPRUFE® AP3 | |
| RE-INJECTO™ LB |
Products
- Product Name
- Description
- Key Benefits
- Applications Type
ADPRUFE® AP3 is an innovative liquid admixture that significantly reduces the water absorption of concrete together with some effect on the reduction of drying shrinkage.
- Significantly reduced water absorption and penetration
- Reduction in drying shrinkage
- A low water-cement ratio
- Water-retaining structures
- Swimming pools
- Lift pits
- Tunnels
Accessories
- Accessory Name
- Description
- Key Benefits
- Applications Type
Re-injecto LB is a blue, plastic injection hose with circular profile with an outside diameter of approx. 11mm and an inner transport duct of approx. 5mm.
- Easy to re-inject using OMNITEK™ Inject or GELACRYL™ resins
- Can be injected but not re-injected with polyurethane or epoxy resins
- Simple installation using the twinbox
- Sealing cold and construction joints, pipe penetrations, joints between diaphragm walls and slabs through post-injection
SILCOR®
SILCOR® is a high-performing cold-applied, seamless waterproofing system for podium decks, green roofs and terraces. The range of products include both spray and hand applied. The SILCOR® 900 series is generally foot-trafficable in under two hours, depending on application. The polymeric structure accommodates most designs without compromising waterproofing performance and while being fully compatible with other GCP waterproofing solutions.
ADPRUFE®
ADPRUFE® is an innovative liquid admixture that significantly reduces both the permeability and drying shrinkage of concrete. When used in combination with ADVA® superplasticisers, this enhanced concrete performance reduces water absorption and penetration providing a significant reduction in drying shrinkage which produces fewer and thinner cracks.
SERVIDEK™ and SERVIPAK™
Designed specifically for deck waterproofing, SERVIDEK™ consists of a cold-applied waterproofing system that consists of a rubber/bitumen compound with a protection board, SERVIPAK™, applied on top. SERVIPAK™ is designed for heavy duty and is capable of accepting sand carpet and hot rolled asphalt. SERVIDEK™/SERVIPAK™ is both robust and fast-curing, with SERVIDEK™ serving as both a waterproofing membrane and an adhesive for SERVIPAK™. The combined system is able to accept road laying equipment in just four hours. Lastly, SERVIDEK™ conforms to irregularity in the substrate surface, while SERVIPAK™ allows indentation in the base coarse aggregate in order to provide resistance to braking.
