MIRA® 2116 is an aqueous solution of chemical dispersants combined with other chemicals which increase its beneficial effects on the quality and plasticity of a concrete mix. Mira 2116 is a high range water reducer, commonly referred to as a superplasticiser. It is an aqueous solution of a modified naphthalene sulfonate. It is a low viscosity liquid which has been formulated by the manufacturer for use as received. Mira 2116 contains no added chloride.
Mira 2116 is formulated to comply with the following chemical admixture specifications for concrete: BS 5075: Part 3: 1985; SS 320:1987; AS 1478 Type HWR (App C4, Class (g)(i). One litre of Mira 2116 weighs approximately 1.17kg ± 0.02kg.
Mira 2116 is a superior dispersing admixture having a marked capacity to disperse the cement agglomerates normally found in a cement-water suspension. The capability of Mira 2116, in this respect, exceeds that of normal water-reducing admixtures.
Mira 2116 produces concrete with extremely workable characteristics referred to as high slump, flowing concrete. Mira 2116 also allows concrete to be produced with very low water-cement ratios at low or normal slumps. Mira 2116 is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water-cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Mira 2116 will also fluidise concrete making it ideal for tremie concreting or other applications where high slumps are desired.
Addition rates of Mira 2116 can vary with type of application, but will normally range from 400 to 1,500mL / 100kg of cementitious material. In most instances the addition of 400 to 1,100mL / 100kg of cementitious material will be sufficient. At a given water-cement ratio, the slump required for placement can be controlled by varying the addition rate. Should job site conditions require using more than recommended addition rates, please consult your local GCP representative.
In concrete containing Mira 2116, the use of an air-entraining agent (such as DARAVAIR® or DAREX® AEA) is recommended to provide suitable air void parameters for resistance against freeze-thaw attack. Most water reducers or water-reducing retarders are compatible with Mira 2116 as long as they are separately added to the concrete. Pretesting of the concrete should be performed to optimize dosages and addition times of these admixtures. Caution should be exercised when using Mira 2116 together with a retarder, as excessive retardation can occur if the admixture dosages are too high. The admixtures should not be in contact with each other before they enter the concrete.
Please contact your local GCP representative for further information regarding the dispensing equipment for this product.
Mira 2116 is available in bulk, and in 205L drums. Mira 2116 contains no flammable ingredients. It will begin to freeze at approximately 0°C, but will return to full strength after thawing and agitation. In storage and for proper dispensing, Mira 2116 should be maintained at temperatures above 0°C.
Read and understand the product label and Safety Data Sheet (SDS). All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements. SDSs can be obtained by contacting your local GCP Applied Technologies representative or office.
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
Mira, Daravair, Darex and AEA are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2020 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP (Singapore) Pte. Ltd, 25 Tanjong Penjuru, Singapore 609024.
This document is only current as of the last updated date stated below and is valid only for use in Singapore. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.sg. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-11-01
https://gcpat.sg/en-gb/solutions/products/mira-mid-range-water-reducers/mira-2116-superplasticiser